Wednesday, October 31, 2012

'nick of time

Hurricane Sandy just flew past and Jenny was put to bed just in the nick of time.


The tarp was tied down just as the rains started.  We had some strong winds but the cover survived just fine.  This new boatyard is a 'normal' yard where the boats are absolutely crammed in. I miss my old yard already.

Boats are buried three rows deep and they are still coming in.  Good thing for me I am not looking for an early launch as I am back in the first row against the outer fence.  Too many generic looking power boats around Jenny for my liking to.  Oh well. It is only for this season.

This month has been mostly about working on other-peoples-boats.  There was a natural convergence of my recent change of status to 'unemployed'  and the needs of a few friends of mine hustling to get work done on their boats before they headed south for the winter.  I guess it was a good thing but Jenny was neglected this month.

Now with my friends safely along their way I shouldn't have many distractions until I find other gainful employment again.

I did manage to get the stove cabinet finished and ready for varnish.  Waiting for varnishing weather or a place to varnish in an indoor environment is holding that project up.The final panels that go  behind the galley countertop are cut and ready for varnish as well.



The boat cover is pretty much the same as what I had last year.  A pair of tripods to support a ridgepole.  Two side braces at the front edge of the cockpit and slats every three feet to keep the tarp from sagging too much. I assembled the same frame around the bottom to tie the tarp down with.  It is a little tight for working inside but it was quick and easy and works.  It passed the hurricane Sandy test just fine.

I have a box full of plumbing fittings for the sink and fresh water systems so I think that will be my next focus.  I also need to figure out how to mount my propane tanks.  I am thinking of hanging them off of the windvane.  I need to check out what sort of clamps and hardware I can find for that. 


Tuesday, October 2, 2012

If the first one is good...

... then the second one will be even better.

Being admittedly dimensionally challenged.  I didn't have a perfect plan in my head when I started building the stovetop 'cabinet'.  I just figured it out as I was going along.  In retrospect.  I probably would have been better served if I had made a fully functional mockup because I ran into a snag just before completing the project.

The stovetop has a non moveable fitting for the propane line at the side of the unit.


When I built the tight fitting pieces that the stove rests upon I didn't take that little fitting into consideration.

My initial solution was to make a cut out to allow for the fiting.


The stopping point came when I realized I had no idea how to make the cabinet blend into the surrounding structure without this awkward hole and exposed propane line.  It was just ugly.

 
So, the solution was to do it over again and this time shift the stove outboard an inch to accomodate the fitting.  If I had used different joinery I might have been able to take the pieces apart and just replace the end but since I used a generous supply of waterproof glue on all the joints there was no way it was going to come apart easily.  The easiest and best solution was to do it over again.


So now I have version two.  One thought I had was to fill the gap on the left end with a capping piece that would also go over the edge of the stove and lock that end down.  Then I realized the flame from the stove was going to run right past that cap and setting the cabinet on fire probably wouldn't result in anything good.  Instead, I glued a filler piece into the space on the left hand side.


Other boat activities involved doing a thorough review of what was left before I could hook up the water tanks to the pumps and the pumps to the faucet and sink drain overboard.  I have a bunch of bits and pieces to order for that but the actually installation should go easily enough.  At first I was planning on putting salt and fresh water pumps on the starboard side which is the side with the sink.  This puts the forward most foot pump lever in a great location for snagging an ankle so I have decided to move one of the pumps to the port side opposite the other.  This way both pump levers are just forward of the first step and almost underneath the step where it is much less likely to cause harm.  My only question is which side should pump which water source; salt or fresh.  Minor details I know.

In order to install the foot pumps I made a template with some left over stock from my first failed attempt at an engine instrument panel.


The three mounting holes are non concentric (scattered around) and the template also allows me to cut the hole for the level acurately.

And that's it.  As always, I had intentions of getting more done but with my new found lack of employment all my local friends have been asking me to help them with various projects.  Looking for my next big career also takes a fair bit of time out of my schedule.  The weather has also been iffy.  On that note, I think a winter cover is moving up the priority list.  I really want to finish the interior panels so I can spend the winter making storage bins around the  galley area.  That could happen over a weekend plus a few days of varnishing.

It is always good to have a plan.

Until next time, keep the dirty side down.  ;-)

Sunday, September 16, 2012

Dimensionally challenged

I think that is it.  I am dimensionally challenged. 

I am starting to settle into the new lack of work routine and carving out some time for the boat amidst my job searching.  Most of my time has been spent fiddling with the stove top frame.  It has proven more time consuming that I imagined.  What a surprise...

Oops, that doesn't quite fit.  Oops, that piece is going to interfere there, Oops, if I set that screw there I will have no room for that other screw there... You know the drill.  Despite my incompetance, the project has been moving forward.

Just before I found out I had no job and no money I had ordered a pocket hole jig made by Kreg.  It is really nice.  I don't think the strength of the angled screw joints are as strong as the advertising suggests but they are adequate for the application and dead simple to do well.

 To use the jig, you simply clamp  one piece of wood into the blue jig thing in one quick motion. Then you drill down the alignment holes using the special step drill until the depth collar bottoms out. There is a little gauge on the side of the blue clampy thing that sets up the collar to the correct position.  Then you screw the pieces together permamently.

I am a little proud of myself for inventing another jig that probably everyone else in the world already knows about.


My 'invention' is just a piece of scrap plywood with two pieces of wood screwed in at a precise 90 degree angle.  To make nice square corner joints you simply butt the pieces together and against the wood guides, clamp then down if you want, and screw then together. Perfect 90 angle every time.


When you are done the joints look like this.  Pegs or mortise in tenon would obviously be stronger but for quick and easy this method seems to work just fine. 

At this point, the stove top frame looks like this in the boat.

The back edge will be bolted to the plywood panel behind.  The inside face against the removable steps will have a recessed piece of cherry plywood to fill in the hole.  There is a small gap on the outboard edge that I am going to leave for now and let the boat tell me how to fill it in. I am still building in storage and that little detail is up in the air.  The front legs will be screwed in as well. 

One issue I ran into was that the frame sits too far forward and interferes with the cabinet door on the settee back.  It just can't be helped. I am either going to modify that door or secure it and leave it as a fake door with a top opening or something.  To be determined...  I can't make the frame any smaller because the stove top just barely fits in as it is. I guess I measured the stove top and figured it would fit forgetting that the frame takes up some space too.  I did mention I was dimensionally challenged didn't I ?

At this point, the frame needs some sanding, maybe some finish work, the inside panel cut and be secured in place.  The last detail will be the connection to the gas line.  There is a notch on the back inside edge of the frame for the fitting, one of those 'oop's moments, and I am not 100% sure there will be room for a for a fitting to connect the gas line.  One way or the other I will make it work but the final solution isn't quite there yet. 

Other than that, I have been pretty much taking inventory of what needs to happen and setting up in my new surroundings.  There are oak trees behind the boat and they have already started shedding leaves and plugging up my cockpit drain scuppers.  I will have to cover the boat soon so that I can free myself from that annoyance.  I have created a list that keeps growing but the details are boring and I never seem to do all that I intend anyway so there isn't much point in listing it all here.  Its all subject to change.

And that is it.  I have had a few curve balls thrown at me and the project has faltered a bit but progress keeps happening which is good.  I am getting pretty close to a working stove and draining sink.  Water pumps and faucets aren't far behind.  The weather is good and I have more free time than I expected.  Pretty good deal I would say.

Em tasol wantoks ;-)

Tuesday, September 4, 2012

Lost and Found

So I went to the boatyard last weekend and found...


...an empty spot where Jenny used to be.

A quick drive over the bridge into Salisbury ...


... and I found this familiar looking nose peeking out.

So two weeks ago Friday I got a letter telling me the boat yard had been sold and recomending a new boat yard nearby.  If I chose that boatyard the move would be paid for by the current yard being sold.

I did some checking around again over the weekend and had some past offers recinded unfortunately so the best course of action seemed to be to take the offer of a free move and simply move over to the other side of the river; at least for this coming season.

I am glad it didn't take long to make my decision because the following Monday, I got a call asking if  I had made a decision to move and could they move Jenny TODAY.  Seemed a little fast so I stalled them for a day while I cleaned and straightened the boat in preparation for the move and cleaned around under the keel.  I hauled a lot of stuff out to be tossed in the back of my garage...


It is amazing how that stuff just piles up.

So the move is done.  I have barely introduced myself at the new yard and haven't started any work there because they seemed quite eager to have full payment up front and I wasn't expecting to pay that bill for a few months.  The old yard usually asked for a deposit with the remainder before Christmas. 

And just to make life that much more interesting, my current employer decided they didn't need the help any more and so I found myself unemployed with no advance warning.  That little disruption has messed up my routine a bit too.  Last time I found myself in this situation I spent the spring and summer prepping Jenny  for paint which worked out well except when I did start looking for new work I found a big economic depression  in my way which meant I was under employed for much longer than expected.   While I would like to sit back, collect unemployment checks and fit out the boat for the next few months, my past experience suggests I should get right to work getting right to work.

Now that I am in the routine of looking for regular employment and doing the self employed thing on and off I should be able to get back to the REAL work of taking care of the 'love of my life' as Jenny as sometimes been referred to as.

I attempted to continue with the stove cabinetry this past weekend only to realize I had forgotten some of my measurements so I am off to the yard later today to get that going again and kick the whole project into gear again.

Lately this blog has turned into a mess of non productivity and excuses. I am trying to change that.  The new cherry stock I bought last week looks great.  I should have it all cut up in no time :-)

Laters Taters,  ;-)

Saturday, August 18, 2012

Hot like an Oven...

Well, maybe "Stove" would be more appropriate.

Its been hot, very hot, and the weekends have been swelter fests at the boatyard.  It seemed like a good time to take a break, maybe a little vacation, catch up on some other chores and just fuss with little stuff in the mornings before it gets too hot inside the boat.  My sweat has been staining all the lovely woodwork...

... and I think the heat has cooked my brain a bit.  Most of my efforts have been towards installing the stove top; that and finding a new home for Jenny but more on that in a bit.  First ideas for mounting the stove was to simply install a fiddle around the edges of the paneling and sit the stove on top.




My problem came from trying to tie in the trim and make it all look good.  Those raw plywood edges were tough to make smooth and straight enough to butt up to an edge and dissapear. Both the side edge and top edge needed to be hidden and it just wasn't working out well.  Then those pesky screws on the left side were interfering with the removable step.  "Damned that it was all connected" is what  friend of mine says.  Doing one thing has ripple effects on everything else around it.  The outboard side was proving tricky too and I just didn't like where it was going to I returned to the drawing board.

Currently, I am working on my second attempt.


This involves more "real" wood and I expect that side panel alongside the ladder in the companionway is going to be cut away. 

The other issue on my mind is moving Jenny. There was an issue with the sale of my current boatyard and it looked like it was going to be around for another year which was a good thing. Just last week though the decision was made and Jenny will have to move in the next month.  All the business is going to another local boatyard that is currently making room for the additional boats.  I stopped by this morning to check it out and I wasn't too impressed.  Its a parking lot with limited power and no water and from the looks of it all the boats are jammed in inches from one another.  It isn't the kind of yard that favors project boats.  On the plus side, as a nice gesture from the current yard, all boats moving to the new yard will be done at the curent yard's expense.  That would save me a nice little bundle of money that could pay for something nice on the boat.  But as I mentioned, I am not too impressed with what I saw.

I was also looking at the old port of Gloucester where I have spot if I want it.  Its a great harbor to launch out of and the yard is highly recommended.  The problem is its probably the dirtiest junkpile of a boatyard I have ever seen.  Random bits of wood, boat parts, travel lift parts, etc. scattered everywhere and once again, only inches between the gunwales.  Its also about half an hour from where I live which makes running back for that forgotten tool even more of a chore.

I have a few more options one of which includes parking Jenny on a local farm where the owner is friend of mine.  It would be close and I would have some room.  Hauling costs twice a year might  make it it a bit more painful on the wallet but that's what I am looking at.  I hope to scope that out tomorrow.

Pretty sad update for a sadly neglected blog I know but that's all I got.  This weekend the heat seems to be breaking and hopefully the weather trend will continue.

Sunday, July 15, 2012

Do or Do Not...

... there is no try. I Did Not this weekend. 90+ degrees and 100% humidity turned the boatyard into a sauna. I made the attempt but it didn't last long. The killer is when I found that I left my fan in the cockpit exposed to the recent rain which apparently is not good for electric fans. Otherwise, I have been driving around looking at empty lots of land and a few 'fixer-uppers' (just a little TLC will have this beauty... blah blah blah). I am also narrowing in on a boatyard not far from me that would work out. Further and less endowed than my current boatyard but with some advantages.