Last weekend a hurricane passing offshore made it easy to postpone boatwork and go on weekend vacation to Maine.
This weekend, a hurricane passing offshore made boatwork impossible once again.
I just got my invoice for next year's winter storage. I guess its time to start thinking about a haul-out date.
Its just been one of those years...
Saturday, August 29, 2009
Sunday, August 16, 2009
Boomin'
(Boom In... get it?)
Yesterday was another boat picnic day. While I was there I was able to install the fitting for the mainsheet block which allowed me to put the boom on.


The temps were in the 90's so I wasn't too crazy about epoxy projects which means I decided to hold off drilling the mounting holes for the genoa tracks.
Speaking of high temps. Yesterday was a good test of the dark hull in hot conditions. High up on the topsides I have not installed the insulation. I held off until I was sure about how the toerails were going to be mounted and I haven't got back to it yet. Up high, in the direct sun, on the dark hull, the inside surface gets quite hot. Not so much to burn my hand but hotter than is comfortable. I am sure that if the whole hull were uninsulated, a day like yesterday would turn my interior into a roasting oven. Down lower, where the insulation was installed the inner surface is barely warm. With a little better ventilation (still in the planning phase) I don't see a problem with 90 degree days and a dark hull. Phew!
With sweat pouring out of every pore I decided to take my $100 skiff for a river cruise. Its rather discouraging to be reminded that a $100 boat can be quite fun and a $50k boat can be all work...
Yesterday was another boat picnic day. While I was there I was able to install the fitting for the mainsheet block which allowed me to put the boom on.


The temps were in the 90's so I wasn't too crazy about epoxy projects which means I decided to hold off drilling the mounting holes for the genoa tracks.
Speaking of high temps. Yesterday was a good test of the dark hull in hot conditions. High up on the topsides I have not installed the insulation. I held off until I was sure about how the toerails were going to be mounted and I haven't got back to it yet. Up high, in the direct sun, on the dark hull, the inside surface gets quite hot. Not so much to burn my hand but hotter than is comfortable. I am sure that if the whole hull were uninsulated, a day like yesterday would turn my interior into a roasting oven. Down lower, where the insulation was installed the inner surface is barely warm. With a little better ventilation (still in the planning phase) I don't see a problem with 90 degree days and a dark hull. Phew!
With sweat pouring out of every pore I decided to take my $100 skiff for a river cruise. Its rather discouraging to be reminded that a $100 boat can be quite fun and a $50k boat can be all work...
Sunday, August 9, 2009
Small victories
I had a nice day yesterday. Beautiful weather, a nice picnic lunch, with some minor boat progress. Today, I was stopped by a clevis pin. Without it, the whole project came to a halt in favor of more productive activities.
I was able to fashion some teak pads for the bow skene chocks. I was a bit handicapped by the lack of tools but the results were acceptable. Not great but acceptable for now. The tendency, working on the mooring, is to cut corners and 'make do' but I am trying to resist that tendency and wait rather than set myself up for extra re-work later. As much as I would like to move forward, taking short term progress that requires long term re-work, really isn't in my best interest. The main goal this summer is enjoyment. Whether that is sailing or picnics I am trying to keep this 'fun'.


At least that is one less line rubbing on my my toerail. Somewhere in storage I have nice looking chafe covers for the lines. The bow line really needs something beter than a strip of towel.

I also drilled through the epoxy plugs I made last month for the mainsheet block.

That's over 2 inches of solid epoxy in that hole. I would have mounted the fitting except at the last minute I decided to put washers on top of the deck as well as underneath and I only had the two washers on hand. It might look a little better without the washers on top but the washers also cover the hole better and allow for more sealant. I also suspect that when this fitting is pulled sideways, half the fitting is pulling upwards but the other half is pushing downwards. The washer gives more surface area to absorb the downwards force and prevent the fitting from eating into the deck. That might not be a concern. I am not an engineer. The fact that the edges of the hole is covered definitely relieves me of some detailed cosmetic work.
The best part of the day was hanging out with Julie and enjoying a nice picnic.

I had intended to come back today and install the mainsheet fitting. That would allow me to mount the boom which would be real progress in my mind. Alas, I rummaged through my hardware bins but couldn't quite figure out how to attach the block to the boom. It was on there before but it was likely cobbled together in a fashion that I don't wish to repeat. From the 'spare' parts I could get everything but a clevis pin. I could probably make it work but I was afraid I would forget until later when the setup would explode in pieces at a critical moment because I forgot to fix it later.
There is always next week.
I was able to fashion some teak pads for the bow skene chocks. I was a bit handicapped by the lack of tools but the results were acceptable. Not great but acceptable for now. The tendency, working on the mooring, is to cut corners and 'make do' but I am trying to resist that tendency and wait rather than set myself up for extra re-work later. As much as I would like to move forward, taking short term progress that requires long term re-work, really isn't in my best interest. The main goal this summer is enjoyment. Whether that is sailing or picnics I am trying to keep this 'fun'.


At least that is one less line rubbing on my my toerail. Somewhere in storage I have nice looking chafe covers for the lines. The bow line really needs something beter than a strip of towel.

I also drilled through the epoxy plugs I made last month for the mainsheet block.

That's over 2 inches of solid epoxy in that hole. I would have mounted the fitting except at the last minute I decided to put washers on top of the deck as well as underneath and I only had the two washers on hand. It might look a little better without the washers on top but the washers also cover the hole better and allow for more sealant. I also suspect that when this fitting is pulled sideways, half the fitting is pulling upwards but the other half is pushing downwards. The washer gives more surface area to absorb the downwards force and prevent the fitting from eating into the deck. That might not be a concern. I am not an engineer. The fact that the edges of the hole is covered definitely relieves me of some detailed cosmetic work.
The best part of the day was hanging out with Julie and enjoying a nice picnic.

I had intended to come back today and install the mainsheet fitting. That would allow me to mount the boom which would be real progress in my mind. Alas, I rummaged through my hardware bins but couldn't quite figure out how to attach the block to the boom. It was on there before but it was likely cobbled together in a fashion that I don't wish to repeat. From the 'spare' parts I could get everything but a clevis pin. I could probably make it work but I was afraid I would forget until later when the setup would explode in pieces at a critical moment because I forgot to fix it later.
There is always next week.
Sunday, August 2, 2009
The Summer that Wasn't
For the second week in a row, rain has prevented me from accomplishing much. Today, I fiddled with some minor mechanical stuff, checked the bilge and ran the engine to top off the battery (which really didn't need it).
I am waiting for the opportunity to mount deck hardware but it just isn't happening. Hopefully, the weather patterns will change soon. At this point I am looking at a first sail around early September.
At least I am enjoying some nice picnics on the boat and I have had a chance to do some non-boat stuff for the first time in many months. I chafe about not getting work done on the boat but at the same time I am enjoying not having to work on the boat all the time.
Like every time I get out to the boat. I find an avian party in progress.

They don't like me crashing their party.

I guess I should be happy they they seem to pick just one corner on the aft deck to tear their dinners apart. Cleaning up is never a problem. The regular deluge for the past month hasn't hurt much either in that regard. I am finding that I have to be careful when I walk on deck in bare feet. Most of the skeletal remains are easy to spot but those little blocky vertibrae are killer when you step on them just right and nearly impossible to see against the bright white deck.
Last week, with the rain about to fall I took the skiff on a ride just to enjoy the scenery and have some fun 'boating'. I came across this Alerion 28 and was interested to see that the builders had the same problems trying to figure out how to run the lines to the stern cleats as I do.

The 'problem' is the toerail. I really love the look but it really gets in the way of running lines off the boat. The Alerion builders chose to just end the toerail short of the stern to make running the stern line easier. I can't say as I like the solution myself but I am really stumped as to how to proceed. Its a small 'flaw' in the design that I had not anticipated. I am not particularly happy with the cleats-on-blocks solution. The leverage works against me and its not particularly attractive. Besides the stern lines, the spring lines tend to work themselves up and down the length of the toerail. A rub strip of half-oval bronze would work but trying to cover every point where the lines cross the toerail leaves a good part of the toerail covered in bronze. A few short sections would be okay but I don't want to have it everywhere. I am still trying to work that out. Custom cast bronze chocks that fit into the toerail is the real solution but I am not really ready to spend that kind of money just yet.
Sorry there is nothing here but then there really isn't anything productive happening on the boat either. I am pretty much over the 'work on the mooring' option and I don't think I am going to launch next year in favor of better working conditions as I 'finish' up the project.
I will be trying again next week. Crossing my fingers.
I am waiting for the opportunity to mount deck hardware but it just isn't happening. Hopefully, the weather patterns will change soon. At this point I am looking at a first sail around early September.
At least I am enjoying some nice picnics on the boat and I have had a chance to do some non-boat stuff for the first time in many months. I chafe about not getting work done on the boat but at the same time I am enjoying not having to work on the boat all the time.
Like every time I get out to the boat. I find an avian party in progress.

They don't like me crashing their party.

I guess I should be happy they they seem to pick just one corner on the aft deck to tear their dinners apart. Cleaning up is never a problem. The regular deluge for the past month hasn't hurt much either in that regard. I am finding that I have to be careful when I walk on deck in bare feet. Most of the skeletal remains are easy to spot but those little blocky vertibrae are killer when you step on them just right and nearly impossible to see against the bright white deck.
Last week, with the rain about to fall I took the skiff on a ride just to enjoy the scenery and have some fun 'boating'. I came across this Alerion 28 and was interested to see that the builders had the same problems trying to figure out how to run the lines to the stern cleats as I do.

The 'problem' is the toerail. I really love the look but it really gets in the way of running lines off the boat. The Alerion builders chose to just end the toerail short of the stern to make running the stern line easier. I can't say as I like the solution myself but I am really stumped as to how to proceed. Its a small 'flaw' in the design that I had not anticipated. I am not particularly happy with the cleats-on-blocks solution. The leverage works against me and its not particularly attractive. Besides the stern lines, the spring lines tend to work themselves up and down the length of the toerail. A rub strip of half-oval bronze would work but trying to cover every point where the lines cross the toerail leaves a good part of the toerail covered in bronze. A few short sections would be okay but I don't want to have it everywhere. I am still trying to work that out. Custom cast bronze chocks that fit into the toerail is the real solution but I am not really ready to spend that kind of money just yet.
Sorry there is nothing here but then there really isn't anything productive happening on the boat either. I am pretty much over the 'work on the mooring' option and I don't think I am going to launch next year in favor of better working conditions as I 'finish' up the project.
I will be trying again next week. Crossing my fingers.
Sunday, July 19, 2009
Quit 'yer bitchin
I realized that I have been doing quite a bit of complaining lately. Sorry about that. Nothing is duller than reading someone's complaints. I am all done now. I will present facts and successes only from now on.
I love the simplicity and sound of a well designed rowboat. No motors to service. No noise to shout over. Slow enough to enjoy the scenery and not scare away the wildlife. I really like my nutshell although it is looking like its starting to ask for some TLC.

So it isn't impossible to row out to the boat. Its just a bit more challenging. I timed the tides and weather this morning and had a quick look over and checked the bilge (nothing out of the bilge pump).
Here is a picture of the burn mark from the 'fireworks' two weeks ago. I am sure now that it was from one of the boats at the marina across the river firing their old flares. From that congested mess in the marina slips I bet my side of the river looked quite deserted and safe for flares. It wasn't though.

I noticed that the line that holds the four fenders I have strapped along the dockside sagged a bit. Between the sag and some wave/wind action I have managed to secure a spot in the "is Awlcraft 2000 repairable?" class this fall. Looks like the wood docksides and my freshly painted hull sides introduced themselves. I really have nothing good to say about docks these days.

I bet my neighbor doesn't either.

It looks like one of the chocks he was tied off to broke free and the next available one was a stretch.
I added an extra fender over the scuff mark in case something shifts again or the boat is rocked extra violently. Its not doing anything now but if the fender on the line moves then the vertical fender will drop down and (hopefully) protect what's left of the hull paint. I should add that the paint isn't scratched through. Just scuffed up and dull.

Once I had settled down and checked things out I had time to contemplate the geometry in the rigging.

After half an hour enjoying the morning the tide swung around and the breeze started picking up which was my cue to head back for some skiff repair work.
The motor mount as repaird by my cousin some years ago.

The inside always bothered me especially. It's not adding much support.

When I grabbed the wood it was obvious that I had let it go a bit too long. This took about 15 seconds with no tools.

In two minutes I had it all off.

Nothing but the best for my great grandfather's skiff. 3/4" marine grade okoume plywood costing somewhere around $170 a sheet last time I checked. Yeah, I forgot to drill some of the holes. The shape I chose as much to look good as to be functional. Square slabs would have worked just as well I think. I coated the inside faces and outer edges with epoxy to help seal it. I will probably do the same on the outer faces and then finish it bright with some Epifanes Gloss Wood Finish I have just lying around. Silly, I know, but that's the kind of guy I am.

While I would really like the new inflatable I think I would rather have sailing hardware and a chance to sail this season. I think I will limp along with the aluminum skiff (and pram perhaps) this season. The solution is to change my mooring next time rather than buy a boat just for this mooring situation, which as anyone that has been reading this blog knows, I absolutely detest. Lesson learned. I have always been a small boat and trailer sailer so the whole mooring thing was a new for me. I am much better educated now. Moorings good; Docks bad; transportation to the mooring is an extremely important part of the equation and it needs to be thought out and executed well. No half-assed measures like I took this year.
I will continue to keep my eyes open for a used inflatable but they seem to be quite scarce and pricey at the moment.
I am getting over the hump with the last minute shopping sprees I was on last month as part of the launching process. I hope to put in a new order for deck hardware soon. Maybe I will have something to show in the near future besides the slow degradation of my beautiful boat and repairs to a 50 year old aluminum skiff that really belong in the scrap pile.
Here's hoping.
I love the simplicity and sound of a well designed rowboat. No motors to service. No noise to shout over. Slow enough to enjoy the scenery and not scare away the wildlife. I really like my nutshell although it is looking like its starting to ask for some TLC.

So it isn't impossible to row out to the boat. Its just a bit more challenging. I timed the tides and weather this morning and had a quick look over and checked the bilge (nothing out of the bilge pump).
Here is a picture of the burn mark from the 'fireworks' two weeks ago. I am sure now that it was from one of the boats at the marina across the river firing their old flares. From that congested mess in the marina slips I bet my side of the river looked quite deserted and safe for flares. It wasn't though.

I noticed that the line that holds the four fenders I have strapped along the dockside sagged a bit. Between the sag and some wave/wind action I have managed to secure a spot in the "is Awlcraft 2000 repairable?" class this fall. Looks like the wood docksides and my freshly painted hull sides introduced themselves. I really have nothing good to say about docks these days.

I bet my neighbor doesn't either.

It looks like one of the chocks he was tied off to broke free and the next available one was a stretch.
I added an extra fender over the scuff mark in case something shifts again or the boat is rocked extra violently. Its not doing anything now but if the fender on the line moves then the vertical fender will drop down and (hopefully) protect what's left of the hull paint. I should add that the paint isn't scratched through. Just scuffed up and dull.

Once I had settled down and checked things out I had time to contemplate the geometry in the rigging.

After half an hour enjoying the morning the tide swung around and the breeze started picking up which was my cue to head back for some skiff repair work.
The motor mount as repaird by my cousin some years ago.

The inside always bothered me especially. It's not adding much support.

When I grabbed the wood it was obvious that I had let it go a bit too long. This took about 15 seconds with no tools.

In two minutes I had it all off.

Nothing but the best for my great grandfather's skiff. 3/4" marine grade okoume plywood costing somewhere around $170 a sheet last time I checked. Yeah, I forgot to drill some of the holes. The shape I chose as much to look good as to be functional. Square slabs would have worked just as well I think. I coated the inside faces and outer edges with epoxy to help seal it. I will probably do the same on the outer faces and then finish it bright with some Epifanes Gloss Wood Finish I have just lying around. Silly, I know, but that's the kind of guy I am.

While I would really like the new inflatable I think I would rather have sailing hardware and a chance to sail this season. I think I will limp along with the aluminum skiff (and pram perhaps) this season. The solution is to change my mooring next time rather than buy a boat just for this mooring situation, which as anyone that has been reading this blog knows, I absolutely detest. Lesson learned. I have always been a small boat and trailer sailer so the whole mooring thing was a new for me. I am much better educated now. Moorings good; Docks bad; transportation to the mooring is an extremely important part of the equation and it needs to be thought out and executed well. No half-assed measures like I took this year.
I will continue to keep my eyes open for a used inflatable but they seem to be quite scarce and pricey at the moment.
I am getting over the hump with the last minute shopping sprees I was on last month as part of the launching process. I hope to put in a new order for deck hardware soon. Maybe I will have something to show in the near future besides the slow degradation of my beautiful boat and repairs to a 50 year old aluminum skiff that really belong in the scrap pile.
Here's hoping.
Saturday, July 18, 2009
Honda 5hp
I will start by saying that I love my Honda 5hp four stroke outboard motor.
With one growing exception. The starter cord gear keeps breaking. I have owned two Honda 5hp's so far, a long shaft and a short shaft, and both have broken the starter cord gear within the first 20 hours of operation. I have spoken with friends that own small Hondas and been told that they have all experienced the exact same problem.
I was at the store buying a new gear today and was told by the technician that I need to be gentle with the cord. I must pull gently until the gear engages the flywheel and only then pull vigorously. He blamed my bad technique. I will admit that I don't baby the motor. I also stick to my story that Honda has a design flaw to work out. I should not be breaking a motor by using the normal starting system every 10-20 hours no matter how hard I choose to pull the starter cord. My lawnmower takes much more abuse from me it has worked flawlessly for years and years.
Here is a picture of my 20 hour Honda 5hp short shaft that I broke last week. The white plastic gear is the one in question. When the starter cord is pulled, the gear rides up the spiral teeth and engages the flywheel which makes the flywheel turn and the engine to start. When the engine starts, the plastic gear is pushed / drops down and out of the way and when I release the cord a spring re-winds the mechanism. Simple.

Except the plastic gear and spiral teeth has such a loose fit that the gear can tip
down...

...and up...

With normal engine vibration the gear hums up and down constantly. Over time the teeth get worn...

... and when the teeth get worn enough, a strong pull will allow the plastic gear to ride up and beyond the teeth on the flywheel, jamming the plastic gear against the flywheel. When that happes the result is very often...

... a broken gear.
The immediate fix is to cut the cord off the starter gear assembly and wrap it around the fitting on the top of the flywheel and start the old fashion way. Wind it on, pull. If it doesn't start on the first pull... wind it on... pull.
Like I said, overall I love the motor; quiet, smooth, low fuel consumption, low(ish) pollution, maybe a bit heavy but I can live with it. I am just getting tired of replacing these gears. Rewinding those darned recoil springs is a P.I.T.A. too.
This morning I got coralled into working for Mom. By the time I got out of that the only decent supplier of stainless hardware in the area had closed (1:00pm) so I wasn't able to get what I needed to fix the skiff motor mount. At present I have no way of getting to Jenny. I might try timing the tide/current and rowing but the Merrimack river is known for its 3+ knots of current and stiff chop which can be a challenge in a 8 foot rowing pram; even a Nutshell pram of excellent character and superior action. Maybe. More than likely I likely I am out of the running until next week. A friend took his kayak across at an opportune time and checked out the boat and pronounced it 'good' so I might have to take it on faith. From a quarter mile away while driving over the highway bridge at 60mph it looked okay to me.
Complicating matters is that the tools and epoxy I would like to use, to make up a new motor mount on the skiff, are currently on Jenny.
Working on boats on moorings really sucks...
I can only keep putting one foot in front of the other and hope I will get there eventually. That has to work. Right?...
[edit]
How about a vote. Should I just whip out the credit card and buy a new 10' inflatable and end my dinghy woes once and for all? Warning: if you say 'Yes' you need to tell me which one and why ;-)
I should add that buying an inflatable will probably impact buying any more sailing hardware this season...
With one growing exception. The starter cord gear keeps breaking. I have owned two Honda 5hp's so far, a long shaft and a short shaft, and both have broken the starter cord gear within the first 20 hours of operation. I have spoken with friends that own small Hondas and been told that they have all experienced the exact same problem.
I was at the store buying a new gear today and was told by the technician that I need to be gentle with the cord. I must pull gently until the gear engages the flywheel and only then pull vigorously. He blamed my bad technique. I will admit that I don't baby the motor. I also stick to my story that Honda has a design flaw to work out. I should not be breaking a motor by using the normal starting system every 10-20 hours no matter how hard I choose to pull the starter cord. My lawnmower takes much more abuse from me it has worked flawlessly for years and years.
Here is a picture of my 20 hour Honda 5hp short shaft that I broke last week. The white plastic gear is the one in question. When the starter cord is pulled, the gear rides up the spiral teeth and engages the flywheel which makes the flywheel turn and the engine to start. When the engine starts, the plastic gear is pushed / drops down and out of the way and when I release the cord a spring re-winds the mechanism. Simple.

Except the plastic gear and spiral teeth has such a loose fit that the gear can tip
down...

...and up...

With normal engine vibration the gear hums up and down constantly. Over time the teeth get worn...

... and when the teeth get worn enough, a strong pull will allow the plastic gear to ride up and beyond the teeth on the flywheel, jamming the plastic gear against the flywheel. When that happes the result is very often...

... a broken gear.
The immediate fix is to cut the cord off the starter gear assembly and wrap it around the fitting on the top of the flywheel and start the old fashion way. Wind it on, pull. If it doesn't start on the first pull... wind it on... pull.
Like I said, overall I love the motor; quiet, smooth, low fuel consumption, low(ish) pollution, maybe a bit heavy but I can live with it. I am just getting tired of replacing these gears. Rewinding those darned recoil springs is a P.I.T.A. too.
This morning I got coralled into working for Mom. By the time I got out of that the only decent supplier of stainless hardware in the area had closed (1:00pm) so I wasn't able to get what I needed to fix the skiff motor mount. At present I have no way of getting to Jenny. I might try timing the tide/current and rowing but the Merrimack river is known for its 3+ knots of current and stiff chop which can be a challenge in a 8 foot rowing pram; even a Nutshell pram of excellent character and superior action. Maybe. More than likely I likely I am out of the running until next week. A friend took his kayak across at an opportune time and checked out the boat and pronounced it 'good' so I might have to take it on faith. From a quarter mile away while driving over the highway bridge at 60mph it looked okay to me.
Complicating matters is that the tools and epoxy I would like to use, to make up a new motor mount on the skiff, are currently on Jenny.
Working on boats on moorings really sucks...
I can only keep putting one foot in front of the other and hope I will get there eventually. That has to work. Right?...
[edit]
How about a vote. Should I just whip out the credit card and buy a new 10' inflatable and end my dinghy woes once and for all? Warning: if you say 'Yes' you need to tell me which one and why ;-)
I should add that buying an inflatable will probably impact buying any more sailing hardware this season...
Subscribe to:
Posts (Atom)